雙組份打膠機是中空玻璃第二道密封（結構密封）的核心設備。但很多人不知道，密封膠A、B組分的混合均勻度，直接決定中空玻璃的壽命——混合不均，膠體局部不固化或固化不完全，輕則密封失效，重則玻璃脫落。

The two-component gluing machine is the core equipment for the second sealing (structural sealing) of insulating glass. But many people do not know that the uniformity of the mixing of components A and B of the sealant directly determines the lifespan of the insulating glass - uneven mixing, partial or incomplete solidification of the colloid, light sealing failure, heavy glass detachment.

混合比可調：7:1到14:1靈活切換。

Mixing ratio adjustable: flexible switching from 7:1 to 14:1.

優良雙組份打膠機允許調整7:1到14:1的混合比率。不同品牌、不同型號的密封膠對混合比例要求不同，機器可調意味著可以適配多種膠品，不受單一供應商捆綁。

The high-quality two-component gluing machine allows for adjusting the mixing ratio from 7:1 to 14:1. Different brands and models of sealants have different requirements for mixing ratios. Machine adjustability means that it can adapt to multiple types of sealants without being bound by a single supplier.

蝴蝶法：混合均勻度的“體檢”標準。

Butterfly method: a "physical examination" standard for mixing uniformity.

涂膠前，建議用蝴蝶法測試密封膠的混合均勻性。具體做法是取混合后的膠樣鋪開，觀察顏色是否均勻一致，有無條紋或斑點。這是行業通行標準，也是驗證打膠機混合效果的非常直觀方法。如果蝴蝶法測試不通過，打出來的膠就是“問題膠”，中空玻璃出廠后密封失效風險出眾。

Before applying glue, the butterfly method must be used to test the uniformity of the sealant mixture. The specific method is to take the mixed adhesive sample and spread it out, observing whether the color is uniform and consistent, and whether there are stripes or spots. This is the industry standard and the most intuitive way to verify the mixing effect of the glue machine. If the butterfly test fails, the glue produced will be the "problem glue", and the risk of sealing failure of the insulated glass after leaving the factory is extremely high.

供膠系統：兩套獨立系統，切換不用等。

Glue supply system: Two independent systems, no need to wait for switching.

出眾雙組份打膠機配備兩套獨立供膠系統，不同密封膠切換方便。中空玻璃生產線用的密封膠通常有聚硫膠和硅酮膠兩種，配方不同、顏色不同，不能混用。雙系統配置意味著換膠不需要停機清洗整個管路，幾分鐘完成切換。

The high-end two-component gluing machine is equipped with two independent glue supply systems, making it easy to switch between different sealants. The sealant used in the production line of insulating glass usually includes two types: polysulfide adhesive and silicone adhesive, with different formulas and colors, and cannot be mixed. The dual system configuration means that changing the glue does not require stopping the machine to clean the entire pipeline, and the switch can be completed in a few minutes.

涂膠參數：深度、寬度、速度合理可控。

Glue parameters: precise and controllable depth, width, and speed.

打膠深度、寬度、速度直接影響密封效果。先進機型具備自動檢測打膠深度功能，根據玻璃厚度和鋁條高度自動調節打膠速度，確保膠體填充到位但不過量。涂膠速度一般可達5-30m/min，涂膠深度3-19mm、寬度6-30mm可調，適配不同規格中空玻璃。

The depth, width, and speed of gluing directly affect the sealing effect. Advanced models have the function of automatically detecting the depth of glue application, adjusting the glue application speed according to the thickness of the glass and the height of the aluminum strip to ensure that the glue is filled in place but not excessively. The glue application speed can generally reach 5-30m/min, the glue application depth is 3-19mm, and the width is adjustable from 6-30mm, suitable for different specifications of insulated glass.

選型提醒： 雙組份打膠機對膠泵、混膠器、液壓系統的要求出眾。現場試機時務必實際打膠測試，觀察膠條是否連續均勻、有無氣泡和斷層。帶一組標準尺寸玻璃去試打，是非常靠譜的選型方式。

Selection reminder: The two-component gluing machine has extremely high requirements for the glue pump, mixer, and hydraulic system. During on-site machine testing, it is necessary to conduct actual adhesive testing and observe whether the adhesive strip is continuous and uniform, whether there are bubbles and faults. Bringing a set of standard size glass for trial molding is the most reliable way of selection.

本文由雙組份打膠機友情奉獻.更多有關的知識請點擊://moysea.com真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from a two-component glue machine For more information, please click: //moysea.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.